[Intel Edison] 使用 MMA7660 加速規

原先買了一塊 adxl345 加速規,也找到了相關函式庫可以用,可是跑範例 code 一直有問題呀… 後來看到這篇文章 ADXL345 – Not working,才知道這目前有 bug,建議轉用另一塊 MMA7660 加速規!


Python 範例

範例用的是整數與浮點數,sleep time 為 0.5 秒

import time, sys, signal, atexit
import pyupm_mma7660 as upmMMA7660

# Instantiate an MMA7660 on I2C bus 0
myDigitalAccelerometer = upmMMA7660.MMA7660(
    upmMMA7660.MMA7660_I2C_BUS,
    upmMMA7660.MMA7660_DEFAULT_I2C_ADDR);

##
Exit handlers### This
function stops python from printing a stacktrace when you hit control - C
def SIGINTHandler(signum, frame):
    raise SystemExit

# This
function lets you run code on exit, including functions from myDigitalAccelerometer
def exitHandler():
    print "Exiting"
sys.exit(0)

# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)

# place device in standby mode so we can write registers
myDigitalAccelerometer.setModeStandby()

# enable 64 samples per second
myDigitalAccelerometer.setSampleRate(upmMMA7660.MMA7660.AUTOSLEEP_64)

# place device into active mode
myDigitalAccelerometer.setModeActive()

x = upmMMA7660.new_intp()
y = upmMMA7660.new_intp()
z = upmMMA7660.new_intp()

ax = upmMMA7660.new_floatp()
ay = upmMMA7660.new_floatp()
az = upmMMA7660.new_floatp()

while (1):
    myDigitalAccelerometer.getRawValues(x, y, z)
outputStr = ("Raw values: x = {0}"
    " y = {1}"
    " z = {2}").format(upmMMA7660.intp_value(x),
    upmMMA7660.intp_value(y),
    upmMMA7660.intp_value(z))
print outputStr

myDigitalAccelerometer.getAcceleration(ax, ay, az)
outputStr = ("Acceleration: x = {0}"
    "g y = {1}"
    "g z = {2}g").format(upmMMA7660.floatp_value(ax),
    upmMMA7660.floatp_value(ay),
    upmMMA7660.floatp_value(az))
print outputStr
time.sleep(.5)
Jerry
Jerry

樂於分享的軟體工程師,曾在新創與大型科技公司實習,獲得黑客松競賽冠軍,擔任資安研討會講者。長期熱衷於資訊安全、雲端服務、網路行銷等領域,希望將科技知識分享給更多人。內容轉載請來信:jlee58tw@gmail.com

發表回應